Telephone (local call charge only) 1300 BRUNEL or 1300 278635
Opening Hours Mon-Thurs 10am-5:30pm; Fri 10am-6:30pm; Sat 10am-3pm
Telephone (local call charge only) 1300 BRUNEL or 1300 278635
Opening Hours Mon-Thurs 10am-5:30pm; Fri 10am-6:30pm; Sat 10am-3pm
This cement is very versatile in being able to be used on both styrene and acrylic plastics. Available sizes 100ml, 200ml, 500ml, 1 Lt, 5 Lt & 20 Lt.
This is the "Supremo" of our range. A very versatile plastic solvent that can be very successfull on grey ABS (Plastruct ), styrene and PVC. Gives excellent setting and curing results for the discerning modeller. Available sizes: 100m1, 200m1, 500ml, 1 Lt, 5Lt & 20 Lt.
An extra solvent-based adhesive for plastics (ABS/PVC/STYRENE) that is particularly useful when a gap-tilling adhesive is needed. Replaces plastic fillers. Size: 50ml.
A natural solvent that works fine with styrone without the heavy "solvent" smell. A pleasant citrus smell, slower working time, no evaporation of the solvent when the container is open, are all benefits. A perfect compliment to out, range of High Quality plastic solvents. Available sizes: 30 ml, 100 ml, 200 ml.
Without doubt, one of the best balsa and light wood glue. Dries clear and waterproof and doesn't crystalise. It is easy to paint over. Not suitable for R.C. planes in structural situations. Great as a dope for paper-covered planes when thinned with ACETONE. Available sizes: 125m1, 250m1, 500m1, 1 Lt.
A general purpose thinners that has been specially developed for use with ALL hobby enamel-base paints available in Australia. Can also be used with solvent-based acrylic paints but NOT with acrylic WATER based ones. Is ideal for all air-brush and spray guns for thinning of paints as well as cleaning Sizes: 200 ml, 1 Lt.
A quality aliphatic 'yellow wood glue' that gives excellent waterproofing results for the real and model boat building people. Excellent adhesive for the model plane builders. 100% sandable and of the highest quality available in Australia. Sizes: 12,5m1, 250mi, 500m1, 1 Lt.
Fine gravel that can be used by many nlodellers from model railway enthusiasts, to diorama and wargame modellers for building scenery detail. Sizes: lkg.
Sandable, Gap-filling, Paste Epoxy resin for high strength, and wide applicationin many hobby and craft situations. Excellent adhesive on most surfaces. (Glass, metals, wood, plastics etc.) Size: Two-part 13gm each A & B.
A contact PVA that sets in 15 - 20 minutes. Suitable for all porous and semi-porous materials. Will also adhere paper to plastic, foils etc to glass, as well as many other unusual applications. Available sizes: 125 ml, 250 ml, 500 ml, 1 Lt.
A clear casting epoxy that is easy to use, and when setting, does not develop extreme heat. Can also be used for making fishing lures; buttons, decoupage and many other hobby and craft applications. Totally safe to be used over and with styrofoam and styrene (it will not melt or react with them). Available sizes 150 ml, 375 ml, 750 ml, 1.5Lt.
A very versatile GLOSS Acrylic Medium that can be applied over any painted surface to give the illusion of water/wet ground etc. Clean-up is with water for ease of use. Available sizes 125ml, 250ml, 500m1, 1 Lt.
A high-grade PVA based decoupage and paper adhesive that will not yellow over time. Available sizes: 50 ml, 125 ml, 250 ml, 500 ml, 1 Lt.
A very ECONOMICAL WATER-BASED POLYURETHANE Coating System for Decoupage Folk-Art, Acrylic Painting & paints, and raw timbers. It DOES NOT alter the colour of the surface being coated like solvent based varnishes etc. Three (3) coats are all that is required for a high lustre finish. Can be recoated if necessary without having to sand or prep the surface again. Recoating can be done as soon as it is touch dry (about 1-2 hours) thereby allowing an item to be completed in 1 day. Use in conjunction with SIMPLY GLUES Deco-Paste for high quality finishes to your pieces of decoupage art/handiwork. Available sizes 125 ml, 250 ml, 500 ml, larger quantities on special order.
A versatile rubber/solvent adhesive that can be used front repairing shoe soles to adhering porous materials to non-porous ones where a contact cement is needed. It also has a wide temperature tolerance that does not affect the adhesive properties. Available sizes: 1OOml. 250 ml. 500 ml.
A quick & simple way to make windows in model buildings, rolling-stock etc. Available sizes: 50 ml
Thinners for WATER-BASED Acrylic modelling paints. Suitable for ALL brands on the market. Available sizes: 50 ml, 200 ml.
Makes tree-making simple & quick for the novice AND the serious modeller. A contact glue that has been especially developed for the scenery builders in any scale. Great for the model railway & wargaming hobbyists. Sizes: 125 ml, 250 ml, 500 ml.
This has similar uses as M50, but is based on Rubber Latex. Excellent for laying model train track when quiet running is desired. Is also extremely good tor static flock applications. Available sizes: 500 ml, l Lt, 2 Lt.
A verv effective and clean fluid that is very versatile in cleaning dirt and residue off of the rails of model railways/roads as well as being a very effective cleaner for all electrical circuit-boards and electrical connections. Doubles as an exceptionally good glass cleaner for scanners and photo-copying machines and eye-glasses. Available sizes: 50mL, 125ml, 25Oml, 500ml, 1 litre. Other sizes available on request!
This has been formulated and blended by SIMPLY GLUES with the modeller in mind! Rather than using very unsuitable fluids and chemicals that are designed for other uses, we have formulated our own special blend of solvents etc, that will NOT attack most, if not all, plastics. Ease of use and low cost means you are getting the best value available, AUSTRALIAN MADE! Available sizes: 250mL, 500mL, 1 Lt, 2 Lt, 5Lt.
Note: While all care has been taken to verify the information above it is the your responsibility to test and verify that the glue selected is appropriate for your use. Simply Glues will not accept any liability for the consequences of the use of any of their glues.