Switch-It Decoder

Control two Tortoise or similar stall motor switch machines. Switch-It remembers the position of your switches during power outages. Each output of the decoder can have a completely different accessory address. The Switch-It provides connections for "local control" pushbuttons. Control switches from your cabs and your control panels.

Snap-It Decoder

Control one twin coil switch machine. Has capacitive discharge for low current draw of track power. Provides connections for two "local control" pushbuttons. You can control switches from your cabs and your control panels.

Switch-Kat Decoder

Kato UnitrackTM and LGB remote control turnouts can now be DCC controlled. The Switch-Kat provides connections for optional switch position indicator lights and "local control" pushbuttons. Simple installation, two wires to the track, two wires to the switch.

Switch-8 Decoder

Control eight SwitchMasterTM, TortoiseTM or similar stall motor switch machines. Switch-It remembers the position of your switches during power outages. Each output of the decoder can have a completely different accessory address. Control switches from your cabs and your mini panels.

D13SR Decoder

1.3 Amp (2 Amp peak) rating and four function outputs. Size: 1.35" x 0.63" x 0.110" (very thin).

D13SR Decoder (4 Pack)

Four pack of the D13SR decoder.

D13SR Decoder (10 Pack)

Ten pack of the D13SR decoder.

D13SRP Decoder

1.3 Amp (2 Amp peak) rating, four function outputs, and eight-pin plug. Size: 1.35" x 0.63" x 0.110".

D13SRJ Decoder

1.3 Amp (2 Amp peak) motor drive it also has six function outputs. Decoder has a nine pin JST wiring harness provides easy installation.Size: 1.50" x 0.63" x 0.25"

D13SRJ (4 Pack) Decoder

4 pack of the D13SRJ decoder. It has a nine pin JST wiring harness provides easy installation. With 1.3 Amp (2 Amp peak) motor drive it also has six function outputs. Size: 1.50" x 0.63" x 0.25"

D14SR Decoder

Designed for the Kato RS2/RSC2 and C44-9, Stewart VO-1000, Intermountain F7, Atlas U23B,U30B locomotives and Australian HO Scale locomotives. 1.3 Amp rating (2 Amp peak). Six function outputs Size: 0.80" x 0.65" x 0.110".

D15SR Decoder

1.3 Amp (2 Amp peak) motor drive it also has six function outputs with connectorized wiring harness provides easy installation. Size: 1.00" x 0.63" x 0.25".

D15SRP Decoder

1.3 Amp (2 Amp peak) motor drive it also has six function outputs with connectorized wiring harness and NMRA 8 pin plug provides easy installation. Size: 1.00" x 0.63" x 0.25".

DA-SR Decoder

Easy installation in many locomotives with Kato drive mechanisms such as Atlas/Stewart/Kato and Proto 1000. This decoder has five function outputs. Size: 2.85" x 0.65" x 0.125".

P2KSR Decoder

Decoder designed for the LifeLike Proto 2000 GP7/9/30,SD60 and Austrains locomotives in HO Scale. Note: follow directions about using the correct light bulbs for DCC. 1.3 Amp (2 Amp peak). Four function outputs, smooth and quiet. Size: 1.45" x 0.65".

KRSR Decoder

Decoder designed for Kato RS2, RSC2-C44-9W, Atlas U23B, Intermountan F7, Stewart VO-1000 and other locomotives in HO Scale. 1.3 Amp (2 Amp peak). Four function outputs, smooth and quiet. Size: 1.45" x 0.65".

SW9SR Decoder

This decoder for the LifeLike HO Scale SW9/SW1200 switcher. Easy installation exactly replaces the existing PC board and no need to remove the weight. The decoder provides a means to install a white LED or 12 Volt bulb as headlight. Because the 1.5 Volt rear light in this locomotive is difficult to replace we provide a dropping resistor right on the decoder. Three function outputs. Size: 0.100" thick - fits P2K SW8/SW9/SW1200.

ATLS4 Decoder

Designed for Atlas/Roco Alco S1, S2, S3 and S4 switchers. The decoder has 2 function outputs with built-in Golden Glow LEDs for head and rear lights. Also included is a motor isolating kit to prevent decoder damage.

BACHDSL Decoder

Designed as a replacement for "Bachmann DCC Equipped" diesels. Providing a more smooth, more quiet operation.The decoder has 4 function outputs. Complete with 2 Golden Glow LEDs in the package.

D408SR Decoder

This is a true 4 Amp (12 Amp peak) self contained decoder for S, O and large scale with "connectorised" wire harnesses. Functions supported: Headlight(s) plus seven additional function outputs. All function outputs have extended effects generators capable of producing Mars lights, Ditch lights, Strobes, Beacons, etc. for each function output if desired. Size: 2.35" x 1.2" x 0.35".

D808 Decoder

This Silent RunningTM decoder is specifically designed for high stall current large scale locomotives such as those produced by USA Trains and Charles Ro. The decoder has 8 function outputs each capable of ½ Amp and a stall rating of 30 Amps with 8 Amps average running current. It measures 3.7" x 1.4" x 0.6".

ATLO Decoder

Plug and Play decoder for Atlas-O locomotives. Also fits some Weaver and other with the "Dog Bone" circuit board. Size: 2.406" x 0.937" x 0.375".

Atlas Harness

Converts D408SR decoder to a plug and play decoder for most Atlas and Weaver locomotives.

NIMFTA Decoder

Made to fit the Intermountain FT-A with two functions

NIMFTB Decoder

Made to fit the Intermountain FT-B with two functions

N12SR Decoder

1.0 Amp (1.25 Amp peak) rating, two function outputs. Size: 0.34" x 0.70" x 0.120".

N12AO Decoder

Plug and Play decoder for the N scale Atlas GP40-2, U25B, B23-7, 30-7, 36-7, GP38, SD25, Trainmaster, etc. 1 Amp (1.25 peak) rating. Golden Glow LEDs are included and installed. Size: 2.65" x 0.370" x 0.120".

N12A1 Decoder

Plug and Play decoder for the N scale Atlas SD50, SD60M, SD60. 1 Amp (1.25 peak) rating. Golden Glow LEDs are included and installed. Size: 3.475" x 0.370" x 0.120".

N12SRP Decoder

1.0m Amp (1.25 Amp peak) rating, two function outputs, and eight-pin plug. Size: 0.34" x 0.70" x 0.120".

N12KOA Decoder

Drop in decoder for N-Scale Kato PA1, E8, Genesis P42, etc, White LEDs

N141P Decoder

Eight pin plug. Four function outputs. 1 Amp rating, 1.25 Amp peak. Measures 1.15" x 0.4" x 0.12".

Z14SR Decoder

1 Amp (1.25 Amp peak) rating and four function outputs. Size: 0.34" x 0.56" x 0.125".

Z14SRP Decoder

1 Amp (1.25 Amp peak) rating and four function outputs, and eight-pin plug. Size: 0.34" x 0.56" x 0.125".

N14SR Decoder

Available with a wire harness. Four function outputs. 1 Amp rating, 1.25 Amp peak. Measures 1.15" x 0.4" x 0.12".

N14SRP Decoder

Plug in decoder with NMRA 8 pin plug. Four function outputs. 1 Amp rating, 1.25 Amp peak. Measures 1.15" x 0.4" x 0.12".

NAVO Decoder

Made to fit the Atlas N scale VO1000 loco with two functions.

NMP15 Decoder

Made to fit the Atlas N scale MP15 loco with two functions

N12A2 Decoder

Plug and Play decoder for the new Atlas "Classic" locomotives GP30, GP35, GP7, GP9

N12KOB Decoder

Drop in decoder for Kato N-Scale F3 A&B